Igel UHF-10 390-490MHz 10W UHF amplifier booster for Long Range RC, FPV
Igel UHF-10 390-490MHz 10W Power amplifier designed for Long Range RC systems. This 390-490MHz RF amplifier can provide up to 40dBm (10W) CW of output power. Applies 14 -36V wide range. Of DC power supplies and. Can be powered from 4S-8S batteries packs.
Two separate RF inputs RF IN1 up to +30dBm (1W), RF IN2 up to +20dBm(0.1W) provides automatic switching between ports. Both ports gives up to 40dBm (10W) CW of output power.
By default RF IN2 input is connected to amplifier. RF IN1 input becomes active as soon as at least +23dBm RF signal is detected on port. Both inputs can be connected to RF sources in the same time, transmission possible on queue. Switching time: RF IN2 20dBm input -> RF OUT <10uS RF IN1 30dBm input -> RF OUT <500uS. Guaranteed high signal gain through both RF ports (see attached picture with test results).
Amplifier consume up to 1.70A at 14V and 0.80A at 30V powering when transmitting. Idle current at 14V is 0.40A, at 30V is 0.20A.
In special case amplifier is able to work with extremely low power supply voltages (see attached picture with test results). Made of high quality components for extreme long ranges. SMA female connectors provides flexible connectivity. LED indication of active input.Solid 280g aluminium case provides suitable heat dissipation. Can be used with all UHF LRS systems e. HK Orange, Dragon Link, Range Link, RMILEC, Arkbird, Immersion RC, UzUHF etc.
- Brand: Igel RF
- Model: Igel UHF-10
- MPN: Does Not Apply
- Max. Output Power: 10W
- Frequency Band(s): UHF
- Supported Modes: AM