Kenwood AT-250 Ham Radio HF-Bands Automatic Antenna Tuner +Cable AT250

This is a Kenwood model AT-250 Automatic Antenna Tuner for the HF 160 through 10-Meter (1.8 to 30 MHz) Ham Radio Bands. It includes the AC power cord and the cable to go between the tuner and a compatible Kenwood HF transceiver, to communicate band information. If you're using it with a different brand radio, you can manually select the band from the front-panel band switch.

It can run on 120V or 240V AC Power, or from an external 13.8V DC automotive battery or other 13.8-Volt DC Source for portable operation. No manual was included, but like most Kenwood, it's probably available for on-line download, if you'd like more information. The AT-250 will tune most coax-fed antennas such as dipoles, beams, quads, verticals etc. And if connected to an appropriate Kenwood HF Transceiver with the included cable, it will automatically select the proper band as in use by the Transceiver, and also automatically select one of four antennas. It needs some serious cleanup, and has a chip and a crack in the front-panel plastic around the band switch, and other chips in the plastic - please see the pictures. Here's some AT-250 Specifications from the Universal Radio site..- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -.

The Kenwood AT-250 automatic antenna tuner covers the HF Ham Bands from 160 through 10 meters (including WARC). It has an AC power supply built in plus 13.8VDC input terminal. The built-in SWR/Power meter indicates peak power on SSB, average power in other modes and does not require calibration adjustment. The meter may be selected for a 20 watt or 200 watt scale.

Four separate sets of antenna terminal are provided. Through power is 100 Watts (200 W PEP).

The tuner is capable of matching a 20 to 150 ohm load or approximately 2.5:1 SWR. Insertion loss is less than 0.9 dB. Maximum tuning time is 15 seconds. Operates from 120/220/240 VAC or 13.8 VDC. Physical: 6.85 x 3.78 x 10.1 inches 9.26 lbs. The AT-250 is a great match for the Kenwood TS-140S, TS-430S, TS-440S. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -. The item "Kenwood AT-250 Ham Radio HF-Bands Automatic Antenna Tuner +Cable AT250" is in sale since Thursday, July 29, 2021. This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers". The seller is "539lj" and is located in NW Oregon.

This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.

Band: HF-Bands
Type: Automatic Antenna Tuner
Band Type: HF-Bands
MPN: AT-250
Brand: Kenwood
Frequency Range: 160-10 Meter HF Bands