RF-KIT RF2K+ Legal Limit Solid State Linear Power Amp/Tuner 160-6M 2KW+ LDMOS

  

55V > Connection is made via threaded studs on the PCB - Current Max. 60A - Operating Temperature: 0-70C - Storage: -30 to + 90C - 50 Ohm SMA Input - 50 Ohm output via solder connection - 2000 Watt output on all bands from 160m-10m 2k5 max. 3 Watt Input - Max. 2500 watt output - Load mismatch: 65:1 (all phase angle) - IMD3> = 30dBc at 1K5 watts - 3rd Harmonic Suppression> =13dB - Separate bias temperature compensation for the two LDMOs - Input power peak limiter - Current limitation adjustable from 25A to 70A - Continuous power limitation from 1000W - Shutdown at >70 degrees on the board - Over-voltage protection >70V - Short circuit protection - Current sensor on the circuit board, suitable for the B26 RF01 controller - Voltage sensor on the circuit board, suitable for the B26 RF01 controller - 48V ON/OFF on the circuit board - Temperature sensor for the display of the heat sink temperature and fan control for the B26 RF01 controller - Use of high-quality ATC capacitors (high current in the power range) - Suitable for BLF188XR; BLF189XR LDMOS - Professional production - Board Colors: Red RF01 Controller: - Input power too high (adjustable) - SWR PA switches off at SWR. 70 degrees - Sequencer for powerless switching of the relays - ATU control with 10 memory banks per antenna - ATU can be bypassed - Controller is developed by RF-Kit and has an Arduino Mega as central CPU (Also a Raspberry Pi 3) 7 Touch Display: - 1024 x 600 High Resolution - Resistive Touch Control - Compatible and Direct - Connect with any revision of Raspberry Pi - HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) - Supports 100-level backlight adjustment The New Precise RF-KIT SWR Bridge: Due to the flexible design, the RF-KIT SWR Bridge can be adjusted to measure from -50dBm up to 69dBm with a dynamic range of up to 60dB and an accuracy of +-0.1dB. Frequency range from 1.8 to 70MHz - Measurement dynamic >40dB - Accuracy +-0.1dB - 12V Operating voltage Automatic Antenna Tuner: - Automatic Antenna Tuner 2k+ works from 160-10m. Dimensions: 7.5"H x 12"W x 17L Weight: approx. The user manual is included. Unit has been powered on, but not thoroughly tested. The cover does not have the screws to attach it to the unit.

See photos for details of physical condition. Powered by SixBit's eCommerce Solution. The item "RF-KIT RF2K+ Legal Limit Solid State Linear Power Amp/Tuner 160-6M 2KW+ LDMOS" is in sale since Tuesday, August 4, 2020. This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Amplifiers". The seller is "surplusmeisters" and is located in Virginia Beach, Virginia.

This item can be shipped worldwide.

• Brand: RF-KIT
• Model: RF2K+
• Type: Linear Amplifier
• Number of Inputs: 1
• Number of Outputs: 4
• Number of Channels: Does not apply
• Power: 110 W
• Color: Silver
• Country/Region of Manufacture: Germany
• Year Manufactured: Does not apply
• Signal Gain: Does not apply
• Custom Bundle: No
• Bundle Description: Does not apply
• Manufacturer Warranty: Does not apply
• NSN: Does not apply
• Alternate Part number: Does not apply
• Item Condition: Pre-Owned
• sku: SM-040228