70MHz-6GHz Zynq7020+AD9363 SDR Development Board With Cooling Fan For Pluto SDR

  

70MHz-6GHz Zynq7020+AD9363 SDR Software Defined Radio Development Board for Pluto SDR MATLAB. Update firmware V0.38, hacked to AD9361, supports 70MHz-6GHz, dual transmitting and receiving, and supports both USB and Ethernet ports. Adding 9363 external input clock interface. AD9363 chip, replacing AD9361, with frequency range of 70MHz6GHz. Current laboratory tests show that there is not significant differences between these two chips.

Board size: about 5 x 8cm. For N25Q128 FLASH, can be used to start.

One channel SD card, can be used to start. Integrated FT2232 debugger, with serial port.

PS end gigabit Ethernet port. PL end with crystal oscillator, can drive AD9363 with pure PL. Support external input of local oscillator. For IIO Oscilloscope, SDR Sharp, GNU Radio, MATLAB, and other software that support for libiio. LO frequency: 70MHz - 6GHz.

UART + JTAG: One (Type-C). Extend IO: 1.8V IOx8, 3.3V IOx4. PTT out: one (5V level). RFIC clock: 0.5ppm TCXO/FPGA/IPEX (default TCXO).

Size: 88 x 62 x 22mm (CNC). Power supply mode: USB/JTAG/XH2.54. 1 x SDR Development Board. 1 x SD Card (Compatible Pluto firmware installed). OR, you may choose to have a replacement. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem you have. Please DON'T leave negative or neutral feed.