8-Band Automatic Band Pass Filter 1.8-54Mhz 200w PEP
8-Band Automatic Band Pass Filter 1.8-54Mhz 200w PEP. This filter board will cover from 1.8 - 54 Mhz with 8 switchable filters and also a bypass relay. There is an onboard BCD decoder for automatic band selection with Yaesu, Elecraft and other radios. There is also a connector onboard to switch the relays manually via a bandswitch with +12v. The bandpass filter is activated by applying 12v to the ON port.
If no power is applied to the ON port the filter is bypassed via relays. High-Q NPO capacitors are used and T94 Amidon cores. The filter is rated to handle 200w pep but the power would have to be derated for high duty cycle modes. This board would be best suited to be installed between the transceiver and amplifier. Designed and manufactured in Australia. PCB Size: 260 x 145 mm. Insertion loss: Better than 0.3dB. Rejection: Better than 30dB from band to band.
SMA connectors for ease of connection. VSWR: better than 1.5:1. Don't hesitate to ask any question.
The item described in our listing. The item "8-Band Automatic Band Pass Filter 1.8-54Mhz 200w PEP" is in sale since Monday, December 14, 2020. This item is in the category "Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Amplifiers". The seller is "vk-amps" and is located in Emerald, VIC. This item can be shipped worldwide.- Model: BPF 200w 7 Band
- Colour: Green
- Country/Region of Manufacture: Australia
- Band: AM
- Type: Linear Amplifier
- Supported Modes: AM
- Number of Outputs: 1
- MPN: Does Not Apply
- Number of Inputs: 1
- Power: 200 W pep
- Brand: VK-AMPS
