MX-P50M 45W HF Power Amplifier For IC-70 FT-817 ICOM Elecraft KX3 QRP Ham Radio








Note that the antenna you used that should well tuned, the SWR should less than 1:1.5 - Open the power on both power supplier and AMP. Power on FT-817, the band indicate on Amp shoule be on.
Press PTT, the TX indicate on Amp should be on. If working on FM or SSTV for long operating time, should lower the output power on FT-817, say 2.5W or 1W. Other QRP transceiver operating manual: Connect acc cable to transceiver PTT-TX and amplifier, ACC green toGNDï¼? RED TOTX-PTT, the radio TX-PTTview manual. Specifications - Frequency Band: 80m 40m 30m-17m 15m-10m - Operating Modes: SSB CW AMï¼?
RTTY and FM-Reduced duty cycle - Rf input: 5W - Out power: 45W - Band mode: Manual - Power requirement: 13.8V 8A, RED "+" BLACK"-" - Cooling method:passive air cooling - Antenna connector: SO-239 50Ohm - Size: 15510035mm DWH - Weight: 0.55KG Package list: - 1x MX-P50M - 1x Power cord - 1x Control cable. Happy shopping, Happy every day. Usually it cost about 35USD-50USD. If you receive defective item, please kindly notify us within 14 days. The item "MX-P50M 45W HF Power Amplifier For IC-70 FT-817 ICOM Elecraft KX3 QRP Ham Radio" is in sale since Saturday, June 23, 2018.
This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Amplifiers". The seller is "thefineshop" and is located in HK. This item can be shipped worldwide.
- MPN: Does Not Apply
- Band: HF
- Model: .. Output Power: 45 W
- Supported Modes: QRP
- Brand: Unbranded
- Type: Power Amplifier

