TOKYO HY-POWER HL-120U All Mode Amplifier 430MHz USED Working
TOKYO HY-POWER HL-120U All Mode Amplifier 430MHz. C : Very Good -A few scratches but looks good. Tokyo High Power 430MHz All-Mode Linear Amplifier (HL-120U) - Excellent Condition, Fully Functional. This is a Tokyo High Power all-mode linear amplifier designed specifically for the 430MHz band-the HL-120U model-in full working order.
Receive amplifier gain: 17.4dB at 433.00MHz. Transmit amplifier output: With a 10W input, it produces 89W (HIGH setting) or 70W (LOW setting). Measured input/output power and current consumption values??
are provided (see the 9th photo). Other functions, such as forced standby and SSB/FM switching, operate normally. As shown in the 9th photo, an input power of up to approximately 10W is optimal for operation.
New power cable (red/black, 0.8m, with terminals; 3.5SQ x 2). Replacement of 4 toggle switches. Replacement of 2 N-type connectors (input/output). Replacement of 1 relay (upgraded to a sealed type). Thorough cleaning and sanitization of the exterior casing, connectors, etc.
Addition of 4 screw-in rubber feet. Replacement of 1 rubber bushing. Green wire: Connect to GND to trigger transmit mode. Yellow wire: Apply +13.8V (or +12V) to trigger transmit mode. The return line is at ground level (connected to the outer shield of the coaxial cable). The unit is in excellent condition, with virtually no scratches. The entire unit has been cleaned and sanitized; there is no dirt or grime. The power cable is equipped with M6 crimp terminals (for binding-post style terminals). If the terminal knobs on your power supply cannot be removed, you may trim a section of the ring terminal (using wire cutters or similar tools) to facilitate the connection.Included accessories: Standby cable, a copy of the instruction manual, and the original box (which is in poor condition). A : Mint - Almost unused. B : Excellent - Beautiful item for used. C : Very Good - A few scratches but looks good. D : Good - Just fine.
