XDT-PA100X HF Power Amplifier Module Suitable for XIEGU-X6100 HF Transceive

  

Output power is increased to 100W, the input standing wave ratio is reduced, the output harmonics are reduced, and the transmission efficiency is improved. Frequency range of 1.8MHz to 30MHz. 70W nominal and 100W maximum. Input power 1W and output 30W.

Input power 5W and output 100W. Increased power, improved communication effect, with 3pcs 7th-order low-pass filters. Frequency range: 1.8MHz 30MHz. Power supply voltage: DC12V 16V. Power supply current: 0.2A for standby, 15A for transmitting.

Direct loss: better than 0.5dB. Maximum output power: 100W at 7/14MHz, 70W at 21/28MHz. Low-pass filter frequency: 33MHz, 18MHz, 9MHz. Harmonic output: better than -50dB (even times), better than -30dB (odd times). Spurious suppression output: better than 40dB. Size: L x W x H = 200 x 120 x 50mm.

Working temperature: 0 - 50? Storage temperature: -20 - 70?

Storage humidity: better than 55%. PTT trigger level: +VCC-2V (low trigger), GND+5V (high trigger). Note: do not output from open circuit, short circuit, or standing wave ratio above 2.0! 1 x Sync Trigger Cable. Please pay attention to the wiring of your transceiver and the amplifier is correct to avoid damage. When installing and wiring the radio amplifier, please take a photo of the connection between the radio and the amplifier and send it to customer service to confirm that there is no wrong connection. We are not responsible for the motor that is damaged due to the wrong phase line or other human factors.